How To Get Dirt Off The Bottom Of The Pool?

How to get dirt off the bottom of the pool? Regular pool maintenance is a task every pool owner must face. Since outdoor pools lack coverage, they are vulnerable to different kinds of debris. Most pool owners rely on pool filters, being sure that they will do all the cleaning alone. Indeed, the filtration system does a great part of the deal when it comes to cleaning the pool.

But sometimes it can’t keep up with the high amount of debris that takes your pool by assault daily. This makes particles of dirt drift to the bottom of the pool. Here is where you have to take the situation under control if you want to prevent pool water from getting cloudy. This post discusses some effective methods to get the dirt off the bottom of the pool.

Pool vacuum

Vacuuming is the most effective and fastest way of ridding your pool’s bottom of impurities. The process is quite easy, yet it takes some hassle in preparing the equipment. Here are the steps to follow when cleaning a pool with a vacuum.

First off, connect the vacuum heat to a telescopic pole, making sure they match perfectly. It’s ok to use a non-telescopic pole if your pool is small and you can reach its center easily. Connect one end of the hose to the telescopic pole. Make sure they snap on easily and have a good seal. Attach another end of the hose to the pool skimmer.

Before you do this, remove all the air from the hose. The fastest way to do it is to place the hose against a pool jet. As bubbles stop coming from the hose, feel free to connect it to the skimmer.

Start vacuuming the pool bottom, performing slow and gentle linear moves. Avoid acting too fast and pushing the vacuum through the water with vigor. It will stir up the debris, making it detach from the pool bottom. You want the dirt to lie on the bottom, that’s why go slow and calm.

If you deal with big pieces of debris, change the filter setting to “Waste”. With this setting the water will drain out of the pool and the suction power will grow. Once your pool bottom is free of impurities, give it a final touch-up. Use a pool brush to scrub the bottom and walls until they get sparkling clean.

Pool net

A pool net is a great tool to fight the big debris, leaves, and insects lingering at the bottom of your pool. In case its handle is too short for your large pool, attach a telescopic pole to it. Run the net across the pool bottom and scoop the dirt out. Remove the net from the water after each pass to empty it. Repeat the process multiple times to make sure you collect all the stubborn debris.

Leaf rake

If a pool vacuum is either broken or missing from your pool maintenance kit, replace it with a leaf rake. Rake is less effective, yet it can help you remove the big debris. Collect the dirt into a pile using the rake, then scoop it up with a pool net. Try to use a plastic rake as the metal one can harm the liner of the pool. If you use a metal rake, be as careful and gentle as you can.

Pool brush

Another alternative to vacuum is a pool brush. It has some advantages to the tools listed above. First of all, it has greater scrubbing power. It means that it can address dirt that has stuck hard to the pool bottom. Rake and net are mainly effective at removing loose debris.

Secondly, you can use the brush to clean not only the bottom but the sides of the pool too. In this way, you provide your pool with a top-to-bottom cleaning. Start by scrubbing down the bottom. You can apply some pressure to help bristles loosen the old soils and stubborn algae. Once you have finished the bottom, switch to the pool sides.

Scour them insistently to rid them of caked-on dirt. Then let the water sit for a couple of minutes so the dirt settles on the bottom. Lastly, sweep or rake the debris into a pile and collect it with a net.

How to prevent the accumulation of dirt at the bottom of the pool?

There are some things you can do to keep dirt from accumulating at the bottom of our pool. Aside from cleaning the pool regularly, there are other important steps you have to take. First of all, you have to optimize your filtration system. A clogged filter is oftentimes the reason dirt settles on the bottom of your pool.

With not enough suction power to suck up all the surface dirt, some of it starts submerging. You have to carry out a backwash to unclog the filter. During backwash, the flow of water in the filtration system gets reversed. The wastewater and the dislodged dirt escape the pool through a waste line. Now you have a clear filter ready to suck up all the debris that ends up on the top of your pool.

Another crucial step to take in balancing the pool water. We talk here about pH, which ideally has to range from 7.2 to 7.6. If it’s too high, it can affect your skin and eyes when swimming. While if it’s too low, the pool water becomes a perfect environment for bacteria, insects, and algae.

Getting the sticky algae off the bottom of the pool is a difficult and time-consuming task. That’s why check out the pH of your pool water every few days. If it’s beyond the normal level, balance it with chemicals.

Conclusion

Learning how to get the dirt off the bottom of the pool is crucial to maintaining it in impeccable condition. The best method to tackle bottom debris is using a pool vacuum. However, if you don’t have it handy, you can use other tools, including leaf rake, pool net, and pool brush.