How Do I Get Stains Off My Pool Floor?

How Do I Get Stains Off My Pool Floor? Similarly, like oil droplets and splotches find ways in different T-shirts, pool stains can also follow different paths. At a point, irrespective of how much care you take, the chances of getting stained pool stains can be high.

Stains in swimming pools are quite common and there can be various reasons behind their occurrence. Environmental factors like dirt and leaves, body oils, and minerals can also result in pool staining.

Also, when stains on the pool floor occur they can range in colors, from red, bright green, blue smears to red blobs, etc. Let’s find out how you can get rid of them and prevent their occurrence further!

Firstly, it’s Essential to Identify the Type of Pool Stains

Removal of stains on the pool floor begins with the identification of different strains that you deal with. A lot of pool stains can be present into 3 categories:

• Metal pool stains: Iron, copper, manganese, can also get introduced through corroded plumbing, pool equipment, and other water sources.
  
• Organic Pool Stains: Can happen due to dirt, bugs, leaves, algae, berries, body oils, worms, etc.
  
• Rust stains: These are caused due to corroded fixtures or misplaced metallic objects inside the pool.

Washing Pool Stains Right Away

You’ve crossed halfway after identifying stains on the pool floor along with their causes. Now it’s time to eliminate them!

Through indication of identification test, the solution is chlorine. However, because the amount used for regularly sanitizing wouldn’t be enough for stain removal. Thus, you’ll have to chlorinate the water a lot. You can use pool for it.

• Testing and balancing water: You can use a liquid testing kit or test strips for ensuring that the alkalinity is between 100 ppm and 150 ppm. The pH must be from 7.4 to 7.6 and 7.5 is considered fine.
  
• Shocking the pool: When dealing with a single stain, you would only require a regular shock dose. However, for larger multiple stains, you can use a triple dose for getting rid of them through just a single shocking round. It means adding 3 pounds shock of calcium hypochlorite for 10,000 gallons of water.
  
• You have to brush pool: You can make use of a stiff pool brush for thoroughly scrubbing stains. It would be fine if you haven’t completely removed the stain at this point.
  
• Running Pump: Let the shock circulate around the swimming pool overnight or for a minimum of eight hours.
  
• Again brush pool: In eight hours, or the next day, you can again scrub the stains on the pool floor.
  
• Check stains: Are they still there? If they’re not, Great! You’re finished! If you can see them, you need to repeat the same process again.

Note: To get best outcomes always shock at night or at dusk. Also to get information about the pool volume you can rely on a swimming pool calculator for figuring it out.

Prevention of Pool Stains

After the removal of stains, it’s best to avoid getting them back to save you from additional efforts.

Preventing Organic Pool Stains

• Pool water must always be balanced, especially, pH, sanitizer, and alkalinity levels.
  
• You can get a robotic cleaner or manually vacuum it often.
  
• Skim pool surface frequently for keeping away twigs, leaves, and other organic debris from sinking.
  
• Move plants bearing fruit from the pool area. When you’re planning pool landscaping you need to ensure that fruit-bearing shrubs and trees are away.
  
• Make frequent checks for stains. When you notice any you can take steps for removing, while they’re small.

Prevention of Metal Pool Stains

While being more vigilant, you can avoid metal dirt and provide a cleaner appearance to the pool.

• Test pool water sources for metals. In case there are any. You can use a hose filter while refilling or filling the pool.
  
• Use metal sequestrant in the pool. The chemical can easily bind with metal particles for keeping them from settling on swimming pool surfaces. This makes it possible for removal through a pool filter.
  
• Maintain plumbing. When any parts use copper pipes, you have to regularly check them for corrosion and also replace them when it seems necessary.
  
• Have steady pH levels in the pool. It would especially be vital when you’ve got copper inside water. Low pH levels don’t make pool water acidic. However, it can corrode copper resulting in its oxidization and ultimately your pool catches stains.

How Do I Get Stains Off My Pool Floor? – Conclusion

Noticing stains on the pool floor can be disappointing. However, after getting the clear cause along with the stain source, you’ll be easily able to remedy it. Later it’s only a matter of preventing any future stains.

Thus, it would always be a great idea for keeping pool shocks with metal pool stain remover for any further jobs.