Every pool owner wants their swimming pools to look sparkling clean. Unfortunately, keeping the pool water clean is not as simple as opening up the faucet and letting the gravity do all of the work. It requires effort on your part. However, with the right knowledge and equipment, maintaining a crystal clear pool is easier than you think it is. Clean on – Cleaning A Pool in Singapore!
When it comes time for you to provide that sparkle, consider hiring a professional pool cleaner in Singapore to help you out for a day or two. A few hours with one of these professionals will give your pool a thorough scrubbing that most people don’t have time for in between busy schedules. Professional cleaners can also remove stubborn stains that would otherwise days or weeks with multiple applications of chlorine.
Professional cleaners are available for homes, hotels, schools, businesses, and other locations in Singapore where regular maintenance is necessary. Let the experts handle it when you are not able to make time for your pool’s needs. Read on – Cleaning A Pool in Singapore
Table of Contents
Regular Pool Cleaning
By performing regular cleanings in these stages, you can keep your pool sparkling clean all year long without much effort on your part. The following information will help you understand what each term means to keep up with regular pool cleaning tasks.
Three main areas of focus:
The first step to any successful cleaning effort begins with vacuuming the entire pool area so that the surface is clear of any loose debris. Many pools come with their vacuum system, but these are more trouble than they are worth for quick cleanups or yearly maintenance. You’ll find that renting a vacuum cleaner from the store is much easier and will get the job done just as well on level surfaces.
Regardless of whether you have a cartridge filter pump or another type, all pool filters need to be “backwashed” periodically to remove trapped particles before they can damage the pump’s components. Without this step, it takes twice as long for your water to pass through the filter since it has to work harder against each particle to pull out dirty water meaning less time cleaning the water itself.
Most people clean their cartridge or sand filters about as often as they vacuum. If you go for at least two weeks without performing this maintenance, the filter will be clogged and unable to do its job and you’ll end up with a swimming pool that is much dirtier than it needs to be.
Here are steps of cleaning a pool:
Test water for pH, chlorine, and alkalinity level before scrubbing the walls.
Cleaning the bottom of the pool first, since it is where most of the dirt accumulates to.
Turn on the suction/skimmer system and adjust to strong suction power (if possible).
Using a cleaner that will help break down oils and grease; scrub away any oil patches or scum along the sides of your swimming pools with a special brush designed for this purpose so as not to damage surfaces due to too much force being exerted onto them. Be sure not to use stiff bristles when cleaning aluminum walls as they may cause serious damage.
Continue to clean the surrounding walls by scrubbing them with a stiff brush or nylon pad, then vacuum or suck up all loose dirt that accumulates on the sides. The cleaner should be sucked into the skimmer basket after rinsing off thoroughly to avoid re-depositing residue back onto surfaces.
Turn to clean steps number 7 for plaster pools and number 9 for vinyl liner pool where you need to remove all traces of surface scale.
Use an acid wash formulated specifically for plaster floors if your pool has this kind of flooring type to break down any rough edges. Which may have developed over time due to water stagnation in cracks, getting rid of any stubborn stains. After applying the pool chemical solution wait until the acid has dried, then vacuum or brush it off.
As a general rule, plaster surfaces are porous and require some sort of sealant to preserve their water-resistant finish. Apply the correct product on surfaces for this purpose first before proceeding on with further cleaning steps if so required.
Use an ordinary pool tile cleaner to clean vinyl liner pool surfaces instead of using any acid products which can cause damage to them if used mistakenly, causing unsightly discoloration stains on the surface of your swimming pool even after scrubbing and washing thoroughly according to the manufacturer’s instructions and guidelines.
When in doubt contact your local pro service provider immediately for advice and guidelines for future reference during operation procedures.
For tile pools, use a heavy-duty cleaner that can remove all algae and other stains from pool tiles. Rinse it off after scrubbing thoroughly for later rinsing, especially on the area around the skimmer to avoid possible staining.
Utilize a brush to scrub away dirt from tile lines, fountains, waterfalls, etc., then rinse it off thoroughly with a strong current of water from the hose before turning the flow back over to the filtration system.
Finally after all these steps have been completed turn on your pump or filter system again to allow it to run through its filtration cycle. This should take anywhere from 10 minutes up to 1 hour depending on the size of your pool. We will also perform chlorine shocking type of maintenance procedure upon completion of basic regular monthly pool cleaning operations.
Add chlorine or other chemicals required to kill bacteria and germs.
Cleaning A Pool in Singapore – Conclusion:
Swimming pool, a great place for a hot day. A place to relax and enjoy the water. If you have a swimming pool at home, it is also your responsibility to keep it clean and safe for everyone to use. Once you have mastered how to properly clean your pool, try cleaning other people’s pools as well if they let you. Now go out there and have some fun in the sun.